This website is co-funded by the European Union. Its contents are the sole responsibility of the European Bank for Reconstruction and Development (EBRD) and do not necessarily reflect the views of the European Union.
Extruder machines
- The following products are available through local vendors that are registered on the Green Technology Selector.
- There are more products that fulfill technical criteria for your country available through vendors from abroad.
-
Rated power13.0 kWScrew diameter27 mmHeating power9 kWSpecific energy consumption (per load) (Euromap)0.20 kWh/kgMaximum output65 kg/h
-
Rated power55.0 kWScrew diameter93 mmHeating power33 kWSpecific energy consumption (per load) (Euromap)0.16 kWh/kgMaximum output350 kg/h
-
Rated power264.0 kWScrew diameter58 mmHeating power185 kWSpecific energy consumption (per load) (Euromap)0.35 kWh/kgMaximum output754 kg/h
-
LFT-G Continuous Fiber Infiltrating and Pelletizing extrusion Line
By 国塑机械（上海）有限公司LFT-G pellet is mainly applied in the structural and decorative materials which need high strength, lightweight and safety that for automotive component and trim; lightweight components for aircraft;Rated power55.0 kWScrew diameter50 mmHeating power30 kWSpecific energy consumption (per load) (Euromap)0.28 kWh/kgMaximum output300 kg/h -
Single Screw Extruder
PE Pipe Extrusion Machine, Autoloader, Designed output capacity: up to 350 kg/hRated power109.9 kWScrew diameter60 mmHeating power18 kWSpecific energy consumption (per load) (Euromap)0.33 kWh/kgMaximum output350 kg/h
-
Spining extruder
By 国塑机械（上海）有限公司Mainly used for melt spinning of PET, PA, PA66, PP and other chips. The screw design of the extruder adopts LTM low temperature mixing element, which has good plasticizing performance. Due to the professional processing technology, the screw and barrel are manufactured with high precision and good linearity.Rated power350.0 kWScrew diameter200 mmHeating power150 kWSpecific energy consumption (per load) (Euromap)0.33 kWh/kgMaximum output1050 kg/h
-
Rated power1346.0 kWScrew diameter118 mmHeating power942 kWSpecific energy consumption (per load) (Euromap)0.35 kWh/kgMaximum output3845 kg/h
-
50/25 Extruder machine (JWTWS50/25)
This model of equipiment mainly used to profile before and after co-extrusion,wood plastic products surface coating.Rated power11.0 kWScrew diameter50 mmHeating power10 kWSpecific energy consumption (per load) (Euromap)0.54 kWh/kgMaximum output35 kg/h
