This website is co-funded by the European Union. Its contents are the sole responsibility of the European Bank for Reconstruction and Development (EBRD) and do not necessarily reflect the views of the European Union.
ХІРШ ПОРОЦЕЛЛЬ
Company information
* Disclaimer
The national borders or regional boundaries shown on Google Maps are not necessarily the same as those recognised by the EBRD or its shareholders.
Local shops
No Shop Available
Products available in shops
-
Range of useFloor, Ceiling, Exterior wall, Interior wall, Facade, Roof, others, WallMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.038 W/(m·K)
-
Range of useFloor, Exterior wall, Roof, others, WallMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.034 W/(m·K)
-
Range of useFloor, Ceiling, Exterior wall, Interior wall, Facade, Roof, others, WallMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.036 W/(m·K)
-
Range of useFloor, Exterior wall, Roof, others, WallMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.034 W/(m·K)
-
Range of useFloor, Exterior wall, Roof, others, WallMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.033 W/(m·K)
-
Range of useFloor, Exterior wall, Roof, others, WallMaterialExtruded polystyrene (XPS)Thermal conductivity (λ-value)0.035 W/(m·K)
-
Range of useFloor, Heating system, othersMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.034 W/(m·K)
-
Hirsch EPS Series
By HIRSCHInsulation materials are a part of the Thermal insulation systems. They are usually installed by using: Adhesives Reinforcements Coatings (render, waterproofing etc.) Mechanical fixing devices Membranes (vapor proof and waterproof) other ancillary materials (mastics, corner strips, joint-covers etc.) Installing insulation often requires expert knowledge. Poor installation of insulation could affect its performance, decrease the potential cost savings and lead to damages to the property/facility/installations. For best results consider seeking advice and having the installation done by qualified installers. For more information, visit the manufacturers' website or contact the local vendor as they could provide valuable guidance. Additionally, before making a decision on the insulation material for a building, industrial system or facility, refer to the relevant legislation such as Building and/or Energy code of your country. If your country does not have such legislation, ask for advice from local professionals. Codes set minimum requirements for energy-efficient design and construction. They outline requirements for new buildings as well as additions and renovations, they also outline the requirements towards industrial systems and facilities. Characteristics of insulation materials listed in the product description indicate their contribution to achieving the goals indicated in the respective Code. Building/Energy code requirements can also be met by applying multiple layers of insulation or by combining the contributions of construction and insulation materials. Consult the respective code or professionals to ensure your investment is in line with the legislation and industry standards.Range of useFloorMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.043 W/(m·K) -
Range of useFloor, Exterior wall, Roof, others, WallMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.030 W/(m·K)
-
Range of useFloor, Exterior wall, Roof, others, WallMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.036 W/(m·K)
-
EPS Power Block
By HIRSCHRectangular profile made of high-density 150 kg/m3 expanded polystyrene rigid foam with a 10 mm grid marked on the surface for quick cutting into inserts of the required sizeRange of useFloor, Exterior wall, Facade, Roof, others, WallMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.040 W/(m·K)
-
HIRSCH Porozell EPS 60 Graphite
By HIRSCHThermal insulation made of expanded polystyrene EPS (foam polystyrene boards PSB-S-15) with graphite. Thermal conductivity 20% better than conventional EPSRange of useCeiling, Facade, RoofMaterialExpanded polystyrene (EPS)Thermal conductivity (λ-value)0.034 W/(m·K)
