CPM series is a chisel plouw which allows shallow tillage but also possible to use for deep soil tillage. Optimum row spaces between tines gives perfect soil loosening and mixing even on high quantity of crop residues. Wings blades on the legs help to cultivate all of the soil

The subsoilers series Prince are particularly designed to work the soil in deep, altough there are surface with clods. Thus two important results can be obtained: It is possible to substitute or alternate the plough, when the superficial vegetation is limited. It can be obtained a crumbled layer in deep which allows to drain the rain and store moisture in the ground. The shanks are made in special steel with specific heat treatments and are fitted with tractive shear bolt. The shaped structure and sturdy frame allows to add shanks to increase working width

The compact TL subsoiler allows for loosening the soil with 4 tines. In this way, AMAZONE offers the option of plow-free tillage even with high straw contents. Plow-free cultivation with deep loosening in one pass prevents the formation of soil compaction in the seedbed

The Mandam subsoilers with the MG and MGW symbols are tools that ensure deep loosening of the soil without disturbing its layered structure and eliminates the plow sole. Thanks to this machine, aeration and irrigation of the lower layers of soil is achieved, this operation is carried out every 3-4 years, especially in fields where water stands on the surface. Mandam offers subsoilers with a pipe roller fi 540 mm (MGW series) and without shafts (MG series) with screw protection. Moles are optionally offered - weights attached to the subsoiler teeth for better water circulation in the soil.

CPM series is a chisel plow which allows shallow tillage but also possible to use for deep soil tillage. Optimum row spaces between tines gives perfect soil loosening and mixing even on high quantity of crop residues. Wings blades on the legs help to cultivate all of the soil

CPM series is a chisel plow which allows shallow tillage but also possible to use for deep soil tillage. Optimum row spaces between tines gives perfect soil loosening and mixing even on high quantity of crop residues. Wings blades on the legs help to cultivate all of the soil

Subsoiler is a machine used for deep soil cultivation without damaging its top layer. The subsoilers of the U486 series loosen and aerate the soil to a depth of approx. 65 cm. Subsoiling breaks off the plow sole, thus restoring normal air-water relations in the soil. The surface and deep soil layers do not mix in this crop. The treatment should preferably be applied immediately after harvesting, when the soil is desiccated. No more tillage should be done in the subsoiled field too early to reduce soil re-compaction. Subsoiler can also be used for soil preparation before planting fruit trees, berry shrubs and deep rooted plants. The technical parameters of the structure correspond to European norms and standards in the field of operational safety and ergonomics, high efficiency was achieved using the most modern, computer-aided techniques, design and construction methods. The subsoiler is produced as a 3-tooth, 5-tooth, 7-tooth or 9-tooth machine with a tooth spacing of 45 cm. All subsoilers are equipped with a solid frame to which the tillage roller is mounted with depth adjustment made by a parallelogram. The subsoiler teeth are protected against damage by a shear bolt. In addition, the tines are equipped with replaceable coulters and a "mole", which performs additional loosening in deep soil layers. The effective working depth of the subsoiler of the U486 series is 65 cm in order to maintain the quality and efficiency of the subsoiler operation, the power requirement for one tooth is about 30 kW.

Subsoiler is a machine used for deep soil cultivation without damaging its top layer. The subsoilers of the U486 series loosen and aerate the soil to a depth of approx. 65 cm. Subsoiling breaks off the plow sole, thus restoring normal air-water relations in the soil. The surface and deep soil layers do not mix in this crop. The treatment should preferably be applied immediately after harvesting, when the soil is desiccated. No more tillage should be done in the subsoiled field too early to reduce soil re-compaction. Subsoiler can also be used for soil preparation before planting fruit trees, berry shrubs and deep rooted plants. The technical parameters of the structure correspond to European norms and standards in the field of operational safety and ergonomics, high efficiency was achieved using the most modern, computer-aided techniques, design and construction methods. The subsoiler is produced as a 3-tooth, 5-tooth, 7-tooth or 9-tooth machine with a tooth spacing of 45 cm. All subsoilers are equipped with a solid frame to which the tillage roller is mounted with depth adjustment made by a parallelogram. The subsoiler teeth are protected against damage by a shear bolt. In addition, the tines are equipped with replaceable coulters and a "mole", which performs additional loosening in deep soil layers. The effective working depth of the subsoiler of the U486 series is 65 cm in order to maintain the quality and efficiency of the subsoiler operation, the power requirement for one tooth is about 30 kW.

Designed for deep loosening of the soil and providing the deepest layers with air and moisture without turning it over for sowing crops. Designed for use in various combined aggregates, for which it is equipped with front and rear attachments.Loosening depth up to 70 cm.

Maschio Gaspardo Attila 300/7 subsoiler

The subsoilers series King are particularly designed to work the soil in deep, altough there are surface with clods. Thus two important results can be obtained: It is possible to substitute or alternate the plough, when the superficial vegetation is limited. It can be obtained a crumbled layer in deep which allows to drain the rain and store moisture in the ground. The shanks are made in special steel with specific heat treatments and are fitted with tractive shear bolt. The shaped structure and sturdy frame allows to add shanks to increase working width